Sand & Gravel
Washed Sand & Aggregates
ABOUT THIS PROJECT
Construction work for this project started on site in May 2007.
CDE were the main contractors on the project and supplied a fully turnkey solution from the design stage through to civil and mechanical work. The sand washing plant produces 1200 tons of washed sand per hour for phase 1 of the project.
The plant is one of the largest sand washing plants in the world with over 1000 tons of reinforcement steel used in the concrete for the site layout. The civils work included over 14,500 cubic metres of concrete and there is also over 30 kms of cabling on the project.
The plant has been delivered with considerable effort put in to ensure maximum plant efficiency and minimal environmental impact. The vast majority of water used in the project is cleaned and recycled back through the system using the CDE AquaCycle thickener, significantly reducing the fresh water top up requirements.
The plant supplies high quality sand to the burgeoning Qatari construction market. Initial tests on the sand being produced by the plant indicate that it is one of the highest quality sands on the Qatari materials market.
Material Claybound Aggregates, Sand & Gravel, Limestone, Crushed Rock
Output C-33 spec sand
Material Sand & Gravel, Manufactured Sands
Output 1¼+ oversize aggregates | 1¼ - #4 washed #57 stone | 4 - 8 mesh grit | C33 concrete sand
Material Sand & Gravel, Claybound Aggregates, Limestone, Crushed Rock, Quarry Waste
Output 2.4mm to 6mm | concrete sand | 63 micron to 2.4mm sand product | 63 micron to 1.2mm washed sand